Video Game Reverse Engineering

Developing Bot

Page 52 of Developing Bot. New thread: https://the.bytecode.club/showthread.php?tid=207

Started by Antidote · Dec 5, 2014

Dec 28, 2014#511

Zombie = Dead (Abandoned Base)

Dec 28, 2014#512

The below "Click Break Shield" function seems to click on the first village every time the bot goes from home village to attacking mode if there is no break shield to click.

Most of the time since it is clicking on the enemy's village, hence no army is dropped and only the notification of you cannot click on the red area appear. But there is one time that the bot dropped an army due to the empty space on the enemy's village.

I have disabled the Click Break Shield so that it doesn't happen again when I'm running the bot, just have to make sure I'm clicking the Break Shield button manually first if I have a shield.

Just to let you guys know my finding. Need to improve on this.

Func PrepareAttack()
   While 1
	  If $RunState = False Then
		 ExitLoop
	  EndIf
	  ControlClick ($HWnD, "","", "left", "1", 50*$x_ratio, 500*$y_ratio) ;Click Attack
	  If $RunState = False Then
		 ExitLoop
	  EndIf
	  Sleep(2000)
	  ControlClick ($HWnD, "","", "left", "1", 190*$x_ratio, 420*$y_ratio) ;Click Find a Match
	  If $RunState = False Then
		 ExitLoop
	  EndIf
	  Sleep(2000)
	  ControlClick ($HWnD, "","", "left", "1", 470*$x_ratio, 330*$y_ratio) ;Click Break Shield
	  ExitLoop
   WEnd
EndFunc

Dec 28, 2014#513

odySSeys wrote:

AtoZ wrote:

@Antidote,GKevinOD,Others

Here is my revised imagesearch code for zombie detection. I simplified it to 2x2 (4 search areas instead of 9). You may add it to func village search TWICE for double check.

@AtoZ, What is zombie since I'm not able to see your bmp file?

Zombie= 💀 deadfish lol . It's just that I'm not used to deadfish. I'm not finished with my bmp files. It's hard to complete all of them. btw, how do I upload files here? Will upload the bmp, au3, and dll files with it.

But if you already have the bmps, just replace the filename to match. It will run even if the image files aren't complete.

Btw, I rename my image files according to this:
e=elixir, f=fill type
ex.e9f9 = elixir lv9 fill type almost full or full
e11f8 = elixir lv11 fill type 8 or half full

Well, it's not perfect guys. The first time I tested my first code I skipped a 300K Zombie/deadfish base but also skipped a lot of non zombie bases as well. But at least somehow it was able to filter some. And for the most recent code that I shared, I'm still testing if it will skip some zombies/deadfish.. So far it already attacked 3-5 zombies and skipped non dead bases.

Dec 28, 2014#514

AtoZ wrote:

odySSeys wrote:

AtoZ wrote:

@Antidote,GKevinOD,Others

Here is my revised imagesearch code for zombie detection. I simplified it to 2x2 (4 search areas instead of 9). You may add it to func village search TWICE for double check.

@AtoZ, What is zombie since I'm not able to see your bmp file?

Zombie= 💀 deadfish lol . It's just that I'm not used to deadfish. I'm not finished with my bmp files. It's hard to complete all of them. btw, how do I upload files here? Will upload the bmp, au3, and dll files with it.

But if you already have the bmps, just replace the filename to match. It will run even if the image files aren't complete.

Btw, I rename my image files according to this:
e=elixir, f=fill type
ex.e9f9 = elixir lv9 fill type almost full or full
e11f8 = elixir lv11 fill type 8 or half full

Well, it's not perfect guys. The first time I tested my first code I skipped a 300K Zombie/deadfish base but also skipped a lot of non zombie bases as well. But at least somehow it was able to filter some. And for the most recent code that I shared, I'm still testing if it will skip some zombies/deadfish.. So far it already attacked 3-5 zombies and skipped non dead bases.

You can use dropbox or other free upload sites I guess.

Dec 28, 2014#515

@K3riroll
Thanks. The code and images are still doing good except for the bot 003 script that hangs upon searching 250 or more.

I can't find any loot just now.. It's not the code but the loot situation and my settings.

Btw, here are the much awaited ZombieSearch files with installation notes:
https://www.dropbox.com/s/5qqqpbpl0mj2dpr/ZombieSearch.rar?dl=0

Btw, I'm not a programmer and just learned autoit a few weeks ago so please feel free to improve the code.

Dec 28, 2014#516

Also, there is also a need to recode the area in order for us to reuse the code for th detection as well.. we all just need to add images and call the fuction. It's that easy and we could snipe th as well. BullyMode here we come!

@Antidote,GKevinOD,others knowledgeable in pixel search

Anyone please revise 'Func AssignTroop()' code and use pixelsearch. It's the troop selection during battle. It's a bit buggy as it is preset/associated to barracks gui settings. I want to use wall breakers, minions and stuff. 🙂

@To All
Regarding zombiesearch, If you skipped a zombie base, don't forget to take a screenshot and save it as BMP and share it here so that we could compile the images. Thanks!

Btw for 64bit users, the bot will not work unless you compile it to x64 and use the exe and not the au3 file. But it will also work if you right click on the bot and run as 64bit. I don't know for 32bit users.

To be honest, I find the bot feasible to use now.

And oh yeah I forgot to include this in the installation notes.. please include this to your codes:

#include <ImageSearch.au3>
#include <MsgBoxConstants.au3>

Dec 28, 2014#517

hey guys once again.. im here to help hope this tweak would help us if you want this tweak i will teach you guys how can you use this.. 🙂

Dec 28, 2014#518

hey guys once again.. im here to help hope this tweak would help us if you want this tweak i will teach you guys how can you use this.. 🙂

interesting looking photo...

Dec 28, 2014#519

Also, there is also a need to recode the area in order for us to reuse the code for th detection as well.. we all just need to add images and call the fuction. It's that easy and we could snipe th as well. BullyMode here we come!

@Antidote,GKevinOD,others knowledgeable in pixel search

Anyone please revise 'Func AssignTroop()' code and use pixelsearch. It's the troop selection during battle. It's a bit buggy as it is preset/associated to barracks gui settings. I want to use wall breakers, minions and stuff. 🙂

@To All
Regarding zombiesearch, If you skipped a zombie base, don't forget to take a screenshot and save it as BMP and share it here so that we could compile the images. Thanks!

Btw for 64bit users, the bot will not work unless you compile it to x64 and use the exe and not the au3 file. But it will also work if you right click on the bot and run as 64bit. I don't know for 32bit users.

To be honest, I find the bot feasible to use now.

And oh yeah I forgot to include this in the installation notes.. please include this to your codes:

#include <ImageSearch.au3>
#include <MsgBoxConstants.au3>

i have this error while checking..

>"C:\Program Files (x86)\AutoIt3\SciTE\..\au3check.exe" -q "C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"
"C:\Users\xiaoming\Desktop\Bot resetter\ImageSearch.au3"(30,46) : error: missing separator character before keyword.
Func _ImageSearch($findImage,$resultPosition,ByRef
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\ImageSearch.au3"(34,73) : error: missing separator character before keyword.
Func _ImageSearchArea($findImage,$resultPosition,$x1,$y1,$right,$bottom,ByRef
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\ImageSearch.au3"(78,63) : error: missing separator character before keyword.
Func _WaitForImageSearch($findImage,$waitSecs,$resultPosition,ByRef
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\ImageSearch.au3"(113,64) : error: missing separator character before keyword.
Func _WaitForImagesSearch($findImage,$waitSecs,$resultPosition,ByRef
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,55) : warning: $Lx: possibly used before declaration.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,63) : warning: $Ly: possibly used before declaration.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],$Ly[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,71) : warning: $Rx: possibly used before declaration.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],$Ly[$i],$Rx[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,79) : warning: $Ry: possibly used before declaration.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],$Ly[$i],$Rx[$i],$Ry[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,55) : error: $Lx: undeclared global variable.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,63) : error: $Ly: undeclared global variable.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],$Ly[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,71) : error: $Rx: undeclared global variable.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],$Ly[$i],$Rx[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,79) : error: $Ry: undeclared global variable.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],$Ly[$i],$Rx[$i],$Ry[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3 - 8 error(s), 4 warning(s)
>Exit code: 2    Time: 0.5228

Dec 28, 2014#520

dinobot wrote:

AtoZ wrote:

Also, there is also a need to recode the area in order for us to reuse the code for th detection as well.. we all just need to add images and call the fuction. It's that easy and we could snipe th as well. BullyMode here we come!

@Antidote,GKevinOD,others knowledgeable in pixel search

Anyone please revise 'Func AssignTroop()' code and use pixelsearch. It's the troop selection during battle. It's a bit buggy as it is preset/associated to barracks gui settings. I want to use wall breakers, minions and stuff. 🙂

@To All
Regarding zombiesearch, If you skipped a zombie base, don't forget to take a screenshot and save it as BMP and share it here so that we could compile the images. Thanks!

Btw for 64bit users, the bot will not work unless you compile it to x64 and use the exe and not the au3 file. But it will also work if you right click on the bot and run as 64bit. I don't know for 32bit users.

To be honest, I find the bot feasible to use now.

And oh yeah I forgot to include this in the installation notes.. please include this to your codes:

#include <ImageSearch.au3>
#include <MsgBoxConstants.au3>

i have this error while checking..

>"C:\Program Files (x86)\AutoIt3\SciTE\..\au3check.exe" -q "C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"
"C:\Users\xiaoming\Desktop\Bot resetter\ImageSearch.au3"(30,46) : error: missing separator character before keyword.
Func _ImageSearch($findImage,$resultPosition,ByRef
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\ImageSearch.au3"(34,73) : error: missing separator character before keyword.
Func _ImageSearchArea($findImage,$resultPosition,$x1,$y1,$right,$bottom,ByRef
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\ImageSearch.au3"(78,63) : error: missing separator character before keyword.
Func _WaitForImageSearch($findImage,$waitSecs,$resultPosition,ByRef
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\ImageSearch.au3"(113,64) : error: missing separator character before keyword.
Func _WaitForImagesSearch($findImage,$waitSecs,$resultPosition,ByRef
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,55) : warning: $Lx: possibly used before declaration.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,63) : warning: $Ly: possibly used before declaration.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],$Ly[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,71) : warning: $Rx: possibly used before declaration.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],$Ly[$i],$Rx[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,79) : warning: $Ry: possibly used before declaration.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],$Ly[$i],$Rx[$i],$Ry[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,55) : error: $Lx: undeclared global variable.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,63) : error: $Ly: undeclared global variable.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],$Ly[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,71) : error: $Rx: undeclared global variable.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],$Ly[$i],$Rx[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
"C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3"(649,79) : error: $Ry: undeclared global variable.
 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],$Ly[$i],$Rx[$i],$Ry[$i],
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^
C:\Users\xiaoming\Desktop\Bot resetter\kojometa with better attack & zombieland.au3 - 8 error(s), 4 warning(s)
>Exit code: 2    Time: 0.5228

Try this code first and tell me if there are errors. I'm new to autoit so it'll be hard for me to debug with just those error messages. Open bluestacks, copy paste the code below, save it and run it as 64/32bit.

#include <ImageSearch.au3>
#include <MsgBoxConstants.au3>

HotKeySet("{ESC}", "Terminate")

HotKeySet("p", "checkForImage")

Func Terminate()
    Exit 0
 EndFunc

opt("mousecoordmode",0)

Global $Title = "BlueStacks App Player"
Global $HWnD = WinGetHandle (WinGetTitle($Title))

Global $ZC=0,$ZombieCount=0, $E
Global $SearchZombie=0, $ZombieCount=0
Global $Tolerance=90

Global $Lx[4]= [ 0, 400, 0, 400 ]
Global $Ly[4]= [ 0, 0, 265, 265 ]
Global $Rx[4]= [ 460, 860, 400, 860 ]
Global $Ry[4]= [ 325, 325, 590, 590 ]

Global $MatchCount=0, $match=0

Global $Area[5][4], $IS_x[8][4], $IS_y[8][4], $E[3][5]

$E[0][0] = @ScriptDir&"\ELIX1\E9F9.bmp"
$E[0][1] = @ScriptDir&"\ELIX1\E10F8.bmp"
$E[0][2] = @ScriptDir&"\ELIX1\E10F9.bmp"
$E[0][3] = @ScriptDir&"\ELIX1\E11F8.bmp"
$E[0][4] = @ScriptDir&"\ELIX1\E11F9.bmp"

$E[1][0] = @ScriptDir&"\ELIX2\E9F9.bmp"
$E[1][1] = @ScriptDir&"\ELIX2\E10F8.bmp"
$E[1][2] = @ScriptDir&"\ELIX2\E10F9.bmp"
$E[1][3] = @ScriptDir&"\ELIX2\E11F8.bmp"
$E[1][4] = @ScriptDir&"\ELIX2\E11F9.bmp"

$E[2][0] = @ScriptDir&"\ELIX3\E9F9.bmp"
$E[2][1] = @ScriptDir&"\ELIX3\E10F8.bmp"
$E[2][2] = @ScriptDir&"\ELIX3\E10F9.bmp"
$E[2][3] = @ScriptDir&"\ELIX3\E11F8.bmp"
$E[2][4] = @ScriptDir&"\ELIX3\E11F9.bmp"


ZombieSearch()

Func ZombieSearch()
   WinActivate ($HWnD)
   $SearchZombie=0
   $ZombieCount=0
   $MatchCount=0
   $match=0
   For $i=0 to 3 Step 1 ;Search per area
	  IS_Area($i)
	  $ZombieCount=$ZombieCount+$ZC
	  $MatchCount=$match
   Next

If $ZombieCount > 1 Then
   $SearchZombie=1
EndIf

MsgBox(0,"","$ZombieCount= "&$ZOmbieCount&", $SearchZombie= "&$SearchZombie&", $MatchCount= "&$MatchCount&@CRLF&"----------------FILE1 E9F9"&@CRLF&$Area[0][0]&","&$Area[0][1]&@CRLF&$Area[0][2]&","&$Area[0][3]&@CRLF&"----------------FILE2: E10F8"&@CRLF&$Area[1][0]&","&$Area[1][1]&@CRLF&$Area[1][2]&","&$Area[1][3]&@CRLF&"----------------FILE3:E10F9"&@CRLF&$Area[2][0]&","&$Area[2][1]&@CRLF&$Area[2][2]&","&$Area[2][3]&@CRLF&"----------------FILE4:E11F8"&@CRLF&$Area[3][0]&","&$Area[3][1]&@CRLF&$Area[3][2]&","&$Area[3][3]&@CRLF&"----------------FILE4:E11F9"&@CRLF&$Area[4][0]&","&$Area[4][1]&@CRLF&$Area[4][2]&","&$Area[4][3]&@CRLF)

EndFunc

Func IS_Area($i) ;Search per area then search per file. If not succeed variant 1 proceed 2 else proceed 3.
   $ZC =0

For $s=0 to 2 Step 1
   For $p=0 to 4 Step 1
		 $Area[$p][$i]=_ImageSearchArea($E[$s][$p],0,$Lx[$i],$Ly[$i],$Rx[$i],$Ry[$i], $IS_x[$p][$i], $IS_y[$p][$i],$Tolerance)

		 If $Area[$p][$i]>0 Then
			   $ZC=1
			   $match=$match+1
		 EndIf

		 ;If $ZC=1 Then
		;	ExitLoop
	;	 EndIf
   Next

;   MsgBox(0,"","$Area ["&$i&"] $ZC: "&$ZC&" $march="&$match&" ElixSet["&$s&"] = "&$Area[0][$i]&","&$Area[1][$i]&","&$Area[2][$i]&","&$Area[3][$i]&","&$Area[4][$i])
   ;If $ZC=1 Then
	;  ExitLoop
   ;EndIf

 Next
;   MsgBox(0,"",$E&" $Area ["&$p&"]["&$i&"] $ZC: "&$ZC&" = "&@CRLF&$Area[$p][0]&","&$Area[$p][1]&","&$Area[$p][2]&@CRLF&""&$Area[$p][3]&","&$Area[$p][4]&","&$Area[$p][5]&@CRLF&""&$Area[$p][6]&","&$Area[$p][7]&","&$Area[$p][8])

EndFunc

If a message box appears with results, then it's working.

if you have this error:
if $result[0]="0" then return 0
if $result^ ERROR

Exit code: 1 Time: 0.7506

then you did run it as 64bit if you have 64bit pc.

chances are, there might be conflict between imagesearch.au3 with the script and the imagesearch.au3 in the autoit installation folder.

This discussion is closed.